Status: Resolving address of
Status: Connecting to…
Status: Connection established, waiting for welcome message…
Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
Response: 220-You are user number 666 of 6900 allowed.
Response: 220-Local time is now 08:42. Server port: 21.
Response: 220-This is a private system - No anonymous login
Response: 220 You will be disconnected after 60 seconds of inactivity.
Command: AUTH TLS
Response: 234 AUTH TLS OK.
Status: Initializing TLS…
Trace: TLS Handshake successful
Trace: Protocol: TLS1.2, Key exchange: RSA, Cipher: AES-256-GCM, MAC: AEAD, ALPN:
Status: TLS connection established.
Command: USER if0_34676652
Response: 331 User if0_34676652 OK. Password required
Command: PASS *************
Response: 230-Your bandwidth usage is restricted
Response: 230 OK. Current restricted directory is /
Command: OPTS UTF8 ON
Response: 200 OK, UTF-8 enabled
Command: PBSZ 0
Response: 200 PBSZ=0
Command: PROT P
Response: 200 Data protection level set to private
Status: Logged in
Trace: Measured latency of 312 ms
Status: Retrieving directory listing…
Command: PWD
Response: 257 / is your current location
Command: TYPE I
Response: 200 TYPE is now 8-bit binary
Command: PASV
Response: 227 Entering Passive Mode (185,27,134,11,139,62)
Trace: Binding data connection source IP to control connection source IP
Trace: Trying to resume existing TLS session.
Command: MLSD
Error: GnuTLS error -110: The TLS connection was non-properly terminated.
Status: Server did not properly shut down TLS connection
Error: The data connection could not be established: ECONNABORTED - Connection aborted
Error: Connection timed out after 20 seconds of inactivity
Error: Failed to retrieve directory listing

Please, help

This is quite telling. It seems that something is going wrong with the FTP connection while trying to switch to Passive Mode, which is usually the result of your router mucking things up.

If you have access to the router settings, you may want to check if there is anything like an FTP ALG or FTP Connection Management feature and try toggling it. If not, you may want to ask your network administrator or ISP about it.

Alternatively, you should be able to work around this by using a VPN.


I’m using a mobile hotspot, how to access the router settings? or i could just use VPN from my phone?

You probably wanted to switch to Wi-Fi before adjusting your router settings. But as you are on hotspot then this isn’t probably the problem.

This is actually better advice.


This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.